COMSATS University Islamabad
Registrar Office, Principal Seat, Islamabad
***

NOTIFICATION

Scheme of Studies of Master of Science in Mechanical Engineering for Fall 2017

It is Hereby notified that the Academic Council in its 13th Meeting held on June 04, 2012 approved the following Scheme of studies of the Master of Science in Mechanical Engineering, MS(ME) with effect from at CIIT system.

1. Minimum Duration: 2 Years
Course WorkMin No. of CoursesMin No. of Credit Hrs
1  Core Courses
4
12
2  Elective Courses
4
12
3  Total Credit Hours of course work
24
4  MS Thesis
1
6
Total No. of Credit Hours of the Program: 30

Note:

1. Admission to MS and PhD programs at CUI will adhere to existing criteria, withrelevance of prior degrees being crucial. If deemed necessary, additional courses may be required to rectify deficiencies. Approval for admission within the CUI System is contingent upon the relevance of the previous degree as per Notification No: CUI - Reg / Notif - 458 / 23 / 493, dated February 28, 2023, stating that the decision made by the Board of Advanced Studies and Research(BASAR) during its meeting on November 30, 2022, stipulated that admission within the CUI System shall be contingent upon possession of a relevant prior degree.In instances where doubts regarding the relevance of a prior degree arise, the determination of relevance thereof shall be made by the respective Dean irrespective of title of the prior degree, based on recommendations put forth by the respective Campus Admission Committee, HoD, and Chairperson, on a case -by -case basis as required.The decision rendered by the Dean in such cases shall be documented within the student's personal file for record-keeping and reference purposes. The additional GRE-Subject test for MS and PhD programs won't be mandatory for such candidates.
2. Furthermore, if the Dean determines that the candidate does not possess the necessary relevant degree, the candidate shall be admitted under the Interdisciplinary category. Additionally, the candidate must undertake the additional GRE-Subject test for MS and PhD programs as a mandatory requirement. Such candidates are required to fulfill all mandatory requirements outlined under the Interdisciplinary clauses. However, if the Dean, by following the above procedure decides that the previous degree, irrespective of the title of the degree of the candidate does not fall under the Interdisciplinary category, the candidate shall not be admitted at CUI System.
3. MS students shall enroll for 09 to 12 credit hours per semester for coursework, with flexibility granted in exceptional cases such as force majeure incidents including inevitable accident, unavoidable casualty, vis major. type of calamity, cataclysm, catastrophe, disaster, tragedy. an event resulting in great loss and misfortune. The Dean may adjust credit hour requirements based on recommendations from the DAC, HoD, and Chairperson. Following coursework, students must register exclusively for a thesis of 06 credit hours each subsequent semester to ensure continuous enrollment throughout their study period.
4. During its 38th meeting, the Academic Council approved the Common Policies, Procedures, and Template of Scheme of Studies for MS and PhD Programs at CUI, aligned with the Higher Education Commission (HEC) Graduate Education Policy (GEP) 2023, with the exception of the above-mentioned paragraphs.

    Credit Hours : 30


List of Core Courses:
Currently there is no data available.



List of Core Courses (A. Design and Manufacturing Specialization)
Course CodeCourse TitleCredit HoursCo-requisite(s)Prerequisite (s)
1 MEE501 Advanced Stress Analysis 3(3, 0)
2 MEE601 Product Design and Development 3(3, 0)
3 MEE701 Advanced Manufacturing Systems 3(3, 0)
4 MTH612 Numerical Solutions of PDEs I 3(3, 0)
List of Core Courses (B. Thermal and Fluid Sciences Specialization)
Course CodeCourse TitleCredit HoursCo-requisite(s)Prerequisite (s)
5 MEE502 Intermediate Fluid Mechanics 3(3, 0)
6 MEE612 Conduction Heat Transfer 3(3, 0)
7 MEE702 Advanced Thermodynamics 3(3, 0)
8 MTH612 Numerical Solutions of PDEs I 3(3, 0)
List of Core Courses (C. Dynamics and Control Specialization)
Course CodeCourse TitleCredit HoursCo-requisite(s)Prerequisite (s)
9 MEE503 Robotics 3(3, 0)
10 MEE603 Control Systems 3(3, 0)
11 MEE703 Advanced Dynamics 3(3, 0)
12 MTH612 Numerical Solutions of PDEs I 3(3, 0)
List of Core Courses (D. Modeling and Simulation Specialization)
Course CodeCourse TitleCredit HoursCo-requisite(s)Prerequisite (s)
13 MEE504 Applied Finite Element Analysis 3(3, 0)
14 MEE604 Advanced CAD/CAM 3(3, 0)
15 MEE704 Advanced Computational Fluid Dynamics 3(3, 0)
16 MTH612 Numerical Solutions of PDEs I 3(3, 0)
List of Elective Courses
Course CodeCourse TitleCredit HoursCo-requisite(s)Prerequisite (s)
17 MEE503 Robotics 3(3, 0)
18 MEE504 Applied Finite Element Analysis 3(3, 0)
19 MEE505 Theory of Plates and Shells 3(3, 0)
20 MEE506 Fracture Mechanics 3(3, 0)
21 MEE507 Theory of Elasticity 3(3, 0)
22 MEE508 Tribology 3(3, 0)
23 MEE509 Computer Integrated Manufacturing 3(3, 0)
24 MEE510 Thermal System Design 3(3, 0)
25 MEE511 Boundary Layer Theory 3(3, 0)
26 MEE512 Micro-Electro-Mechanical Systems 3(3, 0)
27 MEE513 Energy Management 3(3, 0)
28 MEE514 Turbulence 3(3, 0)
29 MEE604 Advanced CAD/CAM 3(3, 0)
30 MEE605 Finite Element Methods 3(3, 0)
31 MEE606 Pressurized Systems 3(3, 0)
32 MEE608 Thin Walled Structures 3(3, 0)
33 MEE609 Mechanism Design 3(3, 0)
34 MEE610 Joining of Materials 3(3, 0)
35 MEE611 Expert System in Mechanical Engineering 3(3, 0)
36 MEE612 Conduction Heat Transfer 3(3, 0)
37 MEE613 Internal Combustion Engines 3(3, 0)
38 MEE615 Robotics and Manufacturing Automation 3(3, 0)
39 MEE616 Automation and Control 3(3, 0)
40 MEE704 Advanced Computational Fluid Dynamics 3(3, 0)
41 MEE705 Materials Design and Materials Processing 3(3, 0)
42 MEE706 Modeling, Simulation and Visualization 3(3, 0)
43 MEE707 Design Management and Prediction 3(3, 0)
44 MEE708 Design Optimization and Analysis Techniques 3(3, 0)
45 MEE709 Design Manufacture and Rapid Manufacture 3(3, 0)
46 MEE710 Advanced Laser Processing 3(3, 0)
47 MEE711 Design of Machine Tools 3(3, 0)
48 MEE712 Convection and Radiation Heat Transfer 3(3, 0)
49 MEE713 Multi Phase Flow 3(3, 0)
50 MEE714 Advanced Topics in Mechatronics 3(3, 0)
51 MEE715 Advanced Mechanical Vibrations 3(3, 0)
52 MEE716 Advanced Topics in Mechanical Engineering 3(3, 0)
53 MGT567 Total Quality Management 3(3, 0)
54 MTH654 Continuum Mechanics 3(3, 0)
55 MTH661 Viscous Fluids I 3(3, 0)
56 MTH662 Viscous Fluids II 3(3, 0)
57 MTH664 Numerical Solutions of PDEs II 3(3, 0)
MS Thesis
Course CodeCourse TitleCredit HoursCo-requisite(s)Prerequisite (s)
58 MEE800 Thesis 6(0, 6)